0-6" range. Accuracy to .001". Large, easy to read digital numbers.

Features a solid one piece body, innovative 3-jaw chuck that firmly grips the case rim. Just tap it on a solid surface as you would a hammer, and the powder and bullet drop into the main chamber for re-use. A soft cushion prevents any damage to bullet. Works with most centerfire cartridges 22 to 45 Calibers

RCBS Quick Change powder funnel kit includes drop tube & 5 adapters.

Accessory base plate-2. Adds rigidity to your reloading bench. Allows convenient installation and removal of reloading presses and equipment. Pre-tapped letter coded holes. Mounting hardware included.

RCBS case lube. This excellent lubricant is water soluble, non-toxic and easily wipes off with no sticky residue. For best results, use with RCBS Lube Dies or RCBS Case Lube Pad (sold separately). Non-toxic. Will not harm powder or primers.

Case Slick is an exlusive formulation that provides exceptional lubricity for resizing or forming of metallic rifle and pistol cases. Testing reveals, Case Slick reduces the force needed to resize 308 Winchester cases by 35 to 70 percent when compared to other spray lubes. Reducing the resizing force makes the process easier on you and your brass. Case Slick is formulated to flow evenly over the surface of the brass. Uniform coverage makes resizing a breeze and eliminates the possibility of denting the shoulder of the case.

RCBS Accessory Handle # 09330. For primer pocket brushes, etc.

RCBS case lube kit. Includes case lube pad, 2 oz bottle of Case Lube-2 and accessory handle with two interchangeable case neck brushes for 22 to 30 calibers.

RCBS Stuck Case Remover #09340. Contains everything required to extract stuck cases from most sizer dies without damaging the die.

This unit will convert your one at a time priming to a tube fed priming system and also eliminate the handling of primers. The RC Supreme Auto Prime body attaches to the same place as the standard priming arm. Attach the proper primer cup and seat plug to the priming arm slide, insert the correct primer tube and safety shield, fill the primer tube and you are ready to prime. The straight push-pull primer arm slide reduces the chances of primers falling out of the primer seat plug. 100 primer capacity. Large and small primer pick up, feed tubes and primer seat plugs included. RCBS lifetime warranty.

RCBS magnum chuck assembly #09416 POW'R PULL MAGNUM CHUCK: MAGNUM CHUCK ASSEMBLY (FOR WSM & BELTED MAGS). Designed for use with large belted and non-belted magnum rifle calibers. For use with RCBS Pow'r Pull Bullet Puller only.

Holds 50 cases. Two sided design. Three different case fits per side. Raised area allows easy access to short pistol cases. Fits WSM, WSSM, WBY, and Ultra Mag family of cases. RCBS Lifetime Warranty.

This block is formed from heavy durable plastic and securely holds up to 40 cases. It is designed with two hole sizes and inside steps to hold cases with a rim diameter between .350" and .530". Use the number 1 holes for cases ranging from .30-06caliber to .300 Magnum. Use the number 2 holes for cases ranging from .222 to .30-30 caliber.

RCBS Primer Pocket Swager Comb quickly removes primer pocket crimp from military cases. Unlike reaming, the Pocket Swager forms a perfectly round pocket correct in dimensions for American boxer-type primers. Comes with swaging heads for large and small primer pockets. Uses RCBS removable shellholders (sold separately). Not for use on progressive presses.

A couple of twists with the RCBS primer pocket brush will thoroughly clean residue out of primer pockets. The brushes, with stainless bristles, fit easily into the no roll accessory handle.

RCBS large primer pocket brush. Features stainless steel bristles for thorough primer pocket cleaning. Made to fit the RCBS Accessory Handle, which is sold separately.

RCBS small primer pocket brush. Features stainless steel bristles for thorough primer pocket cleaning. Made to fit the RCBS Accessory Handle, which is sold separately.

RCBS DUST COVER. RCBS Rock Chucker, Rock Chucker Supreme, Reloader Special 3 and 5 and Partner Single Stage Presses.

Outside Micrometer 0-1" range. Quick, easy to read display. Accuracy to .0001".

RCBS Precision Mic 22-250 Remington 88302. The RCBS Precision Mic is an indispensable tool for safe and accurate loads that help to extend the life of brass. The Precision Mic measures from the datum point on the case shoulder to the base of the cartridge giving the reloader the exact SAAMI tolerance readings. Just a few twists of the Precision Mic and the chambers headspace and bullet seating depth to 0.001" will be determined.

RCBS Precision Mic 223 Remington 88304. The RCBS Precision Mic is an indispensable tool for safe and accurate loads that help to extend the life of brass. The Precision Mic measures from the datum point on the case shoulder to the base of the cartridge giving the reloader the exact SAAMI tolerance readings. Just a few twists of the Precision Mic and the chambers headspace and bullet seating depth to 0.001" will be determined.

RCBS Precision Mic 243 Winchester 88305. The RCBS Precision Mic is an indispensable tool for safe and accurate loads that help to extend the life of brass. The Precision Mic measures from the datum point on the case shoulder to the base of the cartridge giving the reloader the exact SAAMI tolerance readings. Just a few twists of the Precision Mic and the chambers headspace and bullet seating depth to 0.001" will be determined.

RCBS Precision Mic 6.5mm x 55 S/M #88314. A few twists of the Precision Mic and you'll know your chamber headspace and bullet seating depth to 0.001 of an inch. Precision Mic measures from the datum point on the case shoulder to the base, giving you spot-on ANSI/SAAMI tolerance readings. An indispensable tool for safe, accurate loads that extend the life of your brass and rifle. RCBS #88314.

RCBS Precision Mic .270 Win #88316. A few twists of the Precision Mic and you'll know your chamber headspace and bullet seating depth to 0.001 of an inch. Precision Mic measures from the datum point on the case shoulder to the base, giving you spot-on ANSI/SAAMI tolerance readings. An indispensable tool for safe, accurate loads that extend the life of your brass and rifle. RCBS #88316.

RCBS Precision Mic .280 Rem #88317. A few twists of the Precision Mic and you'll know your chamber headspace and bullet seating depth to 0.001 of an inch. Precision Mic measures from the datum point on the case shoulder to the base, giving you spot-on ANSI/SAAMI tolerance readings. An indispensable tool for safe, accurate loads that extend the life of your brass and rifle. RCBS #88317.

RCBS APS hand priming tool. Utilizes an universal shellholder which eliminates the need for additional shellholders. Color-coded primer strips allow easy identity of primer size and type. Primer strip feeding system requires no hand contact with primers. Primer strips automatically feed and can be interlocked for uninterrupted priming. A primer strip loader (sold separately) allows you to use any primer you choose.

RCBS APS large rifle primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8

RCBS APS large pistol primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8.

RCBS APS small rifle primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8.

RCBS APS small pistol primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8

RCBS APS large rifle magnum primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8.

RCBS APS large pistol magnum primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8

RCBS APS small rifle magnum primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8

RCBS APS small pistol magnum primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8

RCBS APS BR2 large rifle primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8

RCBS APS BR4 small rifle primer strip. Color-coded and designed to connect to each other for continuous feeding. Each strip holds 25 primers. May be used with the RCBS APS Primer Strip Loader (sold separately). Package of 8

Features 5 gear-driven rotating heads that make the tedious tasks of chamfering, deburring, primer pocket cleaning, military crimp removal and flash hole deburring quick and easy. Includes 2 stationary positions for case neck brushes or other useful accessories and a cupped area for dry case neck lube. Kit includes large and small primer pocket brushes, chamfering and deburring tools, medium and small case neck brushes and a packet of dry case neck lube. This kit does not include primer pocket uniformers, military crimp removers or flash hole deburring tools.

RCBS dry case neck lube. Replacement packet of dry lubricant for use with the RCBS Trim Mate Case Preparation Center.

RCBS Small Primer Pocket Uniformers is designed to ensure that primer pockets are cut to the correct SAAMI depth specifications, cleaning out built up carbon residue from previous firings and squaring the bottom of the primer pocket with respect to the case head. This step is important as variations in the seating depth of the primer can change how the firing pin strikes the primer producing inconsistent ignition. This tool fits the RCBS Trim Mate Case Prep Center (sold separately) and works with small primer pockets.

RCBS large military crimp remover. This is a replacment military crimp remover for the RCBS Trim Mate Case Prep Center.

RCBS small military crimp remover. This is a replacment military crimp remover for the RCBS Trim Mate Case Prep Center.

RCBS Large Primer Pocket Uniformer is designed to ensure that primer pockets are cut to the correct SAAMI depth specifications, cleaning out built up carbon residue from previous firings and squaring the bottom of the primer pocket with respect to the case head. This step is important as variations in the seating depth of the primer can change how the firing pin strikes the primer producing inconsistent ignition. These are for use with the RCBS Case Prep Center Only.

RCBS Hand Case Neck Turner .28 Cal #90412. Designed to"peel" the brass from the outside of your case necks to a consistent thickness. Most commercially available brass has variances in the case neck thickness. This leads to case neck concentricity and bullet runout issues. Truing up the neck cases produces more consistent and accurate hand loaded ammunition. The cutter portion uses caliber specific pilot/mandrels (sold separately) to guide the case neck. The cutter design features the ability to "zero" the cutter to the pilot/mandrel and then use the micrometer adjustment to dial the desired case neck thickness in .0005 increments. The cutter can also be set for right or left handed use. The Quick Change Case Holder has many advantages over the competition. Most other units use "tap wrench" design to hold cartridge cases. Though this is great for threading holes with a self feeding tap, it does nothing to feed your case neck to the cutter. The RCBS Quick Change Case Holder features an ergonomic design that allows you to rotate the case AND put forward pressure to feed the case neck to the cutter. The quick case change feature helps to speed up the process without having to use small, obtrusive thumbscrews. RCBS #90412.

RCBS Hand Case Neck Turner .30 Cal #90413. Designed to"peel" the brass from the outside of your case necks to a consistent thickness. Most commercially available brass has variances in the case neck thickness. This leads to case neck concentricity and bullet runout issues. Truing up the neck cases produces more consistent and accurate hand loaded ammunition. The cutter portion uses caliber specific pilot/mandrels (sold separately) to guide the case neck. The cutter design features the ability to "zero" the cutter to the pilot/mandrel and then use the micrometer adjustment to dial the desired case neck thickness in .0005 increments. The cutter can also be set for right or left handed use. The Quick Change Case Holder has many advantages over the competition. Most other units use "tap wrench" design to hold cartridge cases. Though this is great for threading holes with a self feeding tap, it does nothing to feed your case neck to the cutter. The RCBS Quick Change Case Holder features an ergonomic design that allows you to rotate the case AND put forward pressure to feed the case neck to the cutter. The quick case change feature helps to speed up the process without having to use small, obtrusive thumbscrews. RCBS #90413.

RCBS Stuck Case Remover-2 Kit #9355. Lets you extract cases from dies with removable guide bushings. It's also useful for our Competition Dies or other sizer dies with a raised expander ball. Kit contains two extractor nuts and two punch rods. RCBS #9355.

RCBS Replacement three-jaw chuck assembly for RCBS Pow'r Pull Bullet Puller.

The RCBS Automatic Bench Priming Tool offers the reloader a fast, accurate and highly sensitive option to seating primers. Primers are fed through the auto primer feed tube one by one, preventing potential contamination by oily fingers. Comes complete with two primer tubes for small and large primers, small and large primer cups and rod assemblies. Uses standard shellholders (Not Included), Bench Mounted.