RCBS Stuck Case Remover #09340. Contains everything required to extract stuck cases from most sizer dies without damaging the die.

RCBS Die lock ring wrench # 09634 hex 1 3/16". No more bashed knuckles or fumbling with adjustable wrenches. The RCBS die lock ring wrench simply slips onto the die lock ring for quick and easy adjustment. A pivoting handle allows leverage from any angle and the heat treated steel stands up to all the brute force you can muster.

10307 RCBS .204 Ruger SB T/C Die Set. The new RCBS AR Series is a must for the progressive reloader. It features a Small Base sizing die and a new Taper Crimp seating die. This combination makes the reloading easier for AR-style or semi-auto shooters. The Taper Crimp Seater is more forgiving when various case lengths are loaded at the same time. Case neck crimp bulges and buckled shoulders are virtually eliminated when Taper crimping is used with cannelured bullets.

10501 FULL DIE SET 223 WSSM

RCBS 223 WSSM Neck Die Set 10502. Neck Sizer Dies resize only the neck of case just enough to snugly hold the bullet. This leaves the shoulder and body at their fire-formed dimensions which leads to longer case life and increased accuracy. For use with bolt action rifles only. New brass must be full length sized and fired before it can be neck sized. Set includes a Neck Sizer Die with Expander-Decapping Unit and a Seater Die with Seater Plug. Shellholder sold separately.

10601 FULL LENGTH DIE SET .22-250 REM

10701 FULL LENGTH DIE SET .220 SWIFT

11101 FULL LENGTH DIE SET .223 REM

11107 RCBS .223 Rem/5.56mm x 45 SB T/C Die Set. The new RCBS AR Series is a must for the progressive reloader. It features a Small Base sizing die and a new Taper Crimp seating die. This combination makes the reloading easier for AR-style or semi-auto shooters. The Taper Crimp Seater is more forgiving when various case lengths are loaded at the same time. Case neck crimp bulges and buckled shoulders are virtually eliminated when Taper crimping is used with cannelured bullets.

11403 RCBS Small Base Die Set .243 Win. RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Small Base Sizer Die (with Expander-Decapping Unit). Regular Seating Die (with Seater Plug). Applies a roll crimp. Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles. These dies size the case somewhat smaller in diamter and also set the shoulder back slightly more than a Full-Length sizer die to ensure poper functioning in the actions of these rifles. NOT RECOMMENDED FOR AMMUNITION IN BOLT-ACTION RIFLES. Shellholder NOT included.

11601 FULL LENGTH DIE SET .243 WSSM

12001 FULL LENGTH DIE SET .25-06

12401 FULL LENGTH DIE SET .25 WSSM

12501 FULL LENGTH DIE SET .257 ROBERTS

RCBS Neck Sizer Die .257 Roberts #12530

RCBS .257 WBY Mag Neck Sizer die 12630. Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy.

13501 FULL LENGTH DIE SET .270 WIN

13503 RCBS Small Base .270 Win Die Set. RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Small Base Sizer Die (with Expander-Decapping Unit). Regular Seating Die (with Seater Plug). Applies a roll crimp. Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles. These dies size the case somewhat smaller in diamter and also set the shoulder back slightly more than a Full-Length sizer die to ensure poper functioning in the actions of these rifles. NOT RECOMMENDED FOR AMMUNITION IN BOLT-ACTION RIFLES. Shellholder NOT included.

13603 RCBS Small Base 7mm Rem Mag Die Set. RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Small Base Sizer Die (with Expander-Decapping Unit). Regular Seating Die (with Seater Plug). Applies a roll crimp. Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles. These dies size the case somewhat smaller in diamter and also set the shoulder back slightly more than a Full-Length sizer die to ensure poper functioning in the actions of these rifles. NOT RECOMMENDED FOR AMMUNITION IN BOLT-ACTION RIFLES. Shellholder NOT included.

13801 FULL DIE SET 7x57 MAUSER

15301 FULL LENGTH DIE SET .300 WIN MAG

15303 RCBS Small Base .300 Win Mag Die Set. RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Small Base Sizer Die (with Expander-Decapping Unit). Regular Seating Die (with Seater Plug). Applies a roll crimp. Small base sizer dies are usually required for reloading ammunition to be used in automatic, semi-automatic, pump, slide and some lever-action rifles. These dies size the case somewhat smaller in diamter and also set the shoulder back slightly more than a Full-Length sizer die to ensure poper functioning in the actions of these rifles. NOT RECOMMENDED FOR AMMUNITION IN BOLT-ACTION RIFLES. Shellholder NOT included.

15501 FULL LENGTH DIE SET .308 WIN

RCBS #15507. The new RCBS AR Series die set is a must for any progressive reloader. Each set comes packaged with a full length small base sizing die and a taper crimp seating die. With this combination reloading for an AR-style, semi-automatic, pump action or lever action rifle just became a lot easier. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. The taper crimp seating die is helpful as it is a bit more forgiving die for crimping cases that have variable case lengths; helping to reduce the number of bulges and buckled shoulders when crimping in bullets with a cannelure. These dies will also work with any single stage or turret press that will accept 7/8"-14 threaded dies. Shellholder sold separately. Small Base Full Length Sizing Die, Taper Crimp Seating Die.

16301 FULL LENGTH DIE SET .338 WIN MAG

17701 FULL DIE SET .338 REM ULTRA MAG

17801 FULL DIE SET 7MM REM ULTRA MAG

RCBS 18608 3-Die Steel Set .44 Mag .44 Spec. Group: B Use shell holder #18.

20804 RCBS .458 Win Mag 3 Die Steel Set. The 3-Die Set has a sizer die with decapping unit, an expander die and a seater die with crimp. Cases must be lubed prior to sizing. Shellholder sold separately. Sizer Die (with decapping unit). Expander Die (for expanding and belling case mouth). Seater Die (with roll crimp). Does not feature a carbide sizing ring (cases must be lubed prior to sizing). Lifetime Guarantee from RCBS. Shellholder not included.

22115 3-DIE CARB TC SET .40 S&W/10 AUTO

23812 3 DIE CARB SET 500 S&W

30801 FULL DIE SET .300 WINCHESTER SHORT MAG

RCBS Neck Sizer Die 300 WSM 30830. Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy.

31101 FULL LENGTH DIE SET 7MM REM SA ULTRA MAG

31601 FULL DIE SET .325 WIN SHORT MAG

RCBS Competition 2-Die Set 308 Winchester 37801. RCBS Competition Dies are perfect for the reloader wanting reloads with tight tolerances and extreme precision. They feature a full-length sizer with raised expander ball for smooth, effortless neck expansion and maximum concentricity between die neck and body. The seater die features a micrometer adjustment for super accurate bullet seating depth in increments of 0.001". Bullets are inserted through a side window in the die, and the special bullet guide ensures correct bullet alignment. Black oxide finished steel. Not for use with progressive presses. Includes: Extended Shellholder.

Decap and lube cases in one step. Works in progressive as well as single stage presses. It's faster and cleaner than a lube pad. Easy to refill with RCBS Case Lube-2. Standard 7/8"-14 threads.

87580 DECAP DIE .22 THRU .25 CAL. USE A DECAPPING DIE TO QUICKLY REMOVE PRIMERS FROM CASE PRIOR TO CLEANING.

87585 DECAP DIE .27 THRU .45 CAL, HEAVY DUTY. USE OUR DECAPPING DIE TO QUICKLY REMOVE PRIMERS FROM CASES PRIOR TO CLEANING.

RCBS Headed Decapping Pins. This factory replacement steel decapping pins for RCBS dies fits: RCBS Reloader Special Dies. RCBS Cowboy Dies. All RCBS "Precision" dies with the following exceptions: 6mm PPC, 7mm TCU, 35 Whelen, 357 Sig, 358 Winchester/356 Winchester, 416 Remington Magnum

Decapping Unit Short RCBS # 9622